Pro Inmotion V14 High Adjustable Pedal Hanger (Stout)

Pro Inmotion V14 High Adjustable Pedal Hanger (Stout)

• 18mm thick base to withstand jumps on the highest pedal setting
• Designed to withstand jumps on the highest pedal setting

Height Settings

• Supports original pedals
• Lowest setting: 22mm lower than factory setting
• Highest setting: 26mm higher than factory setting

What you get:

• Pair of pedal hangers (Left and Right)
• Tools in the box

NOTE: If you want to make use of the highest pedal hanger setting with the factory Inmotion fairing, you will need to make a 1 inch high by 2 inch wide gap, by the pedal hanger, on the manufacturer supplied Inmotion fairing. The single screw on the inside of the pedal hanger may or may not be needed, depends on the version of your wheel. Please remove it if it interferes with your trolley handle during installation.

• If the screw for your V14 pedal hanger is too short, we believe the hardware you need is an M6 x 30mm full-threaded bolt.

Save 20% on e-RIDES Inmotion pedals (V12,V13,V14) by adding one to your order here. Select your pedal design below